resin | The Little Art Shop

Dala Alcohol Inks

artstuff — Thu, 11 Apr 2024 14:14:03 +0000

Dala Alcohol inks are highly saturated, translucent and fast-drying. They can be used on any hard surface, glass, plastic, ceramic, stone, metal, leather, polymer clay, resin and more.
They are indelible and impervious to water but will clean up and re-wet with alcohol, allowing for unique effects that cannot be achieved with our water-based inks.
Ideal for mixing with resin for translucent colour, and for metal tape artwork, and on Yupo alcohol ink paper.

Please note:
Alcohol ink vapors are extremely flammable.
Keep out of reach of children.
Bottles are filled by volume and may not look completely full. This is intentional to allow for expansion and contraction.

The post Dala Alcohol Inks first appeared on The Little Art Shop.

ClearCast Resin

artstuff — Tue, 19 Mar 2024 09:31:18 +0000

This resin is an optically clear resin system formulated to produce clear laminates, coats, linings etc with good UV stability.
It is commonly used to make jewellery, preserve items, seal/protect artwork, paintings, sculptures etc.
It is easy to use, cures at ambient temperature and is self-levelling.
The resin is non-flammable, low-odour and has no solvent content.

Coverage – (applied 0.5 mm thick) 1 m² per 0.5 liter mixed resin (based on a self-levelling layer 0.5mm thick).
Mixing ratio – by volume 1:1
The mixing ratio must be accurately followed. It is not possible to change the ratio. This would result in lower mechanical properties and the resin not drying properly. The mixture should be thoroughly stirred (mix for 3-4 mins) to ensure full homogeneity. Epoxy systems tend to heat up much faster in a pot than as a thin film. Therefore mix only the necessary amount usable within the given pot life.

The post ClearCast Resin first appeared on The Little Art Shop.

Supernova Hard UV Resin

artstuff — Tue, 21 Nov 2023 09:18:20 +0000

UV resin cures quickly with exposure to UV light. UV resin is an easy-to-use, 1 part resin that doesn’t require mixing. Instead of mixing two parts, resin and hardener, you have a single part that only cures when exposed to UV light. This means you have a virtually unlimited work time!
Curing time :
UV Lamp (36watts) 2 – 4 minutes
Sunlight (Sunny day) 5 – 10 minutes
Sunlight (Cloudy) 20 – 40 minutes
Instructions :
Hardening occurs under sunlight, please work indoors. Hardening occurs when exposed to ultravoilet light for a long time. Please wear gloves and protective mask when working with resin. When working ensure that skin, clothes, furniture etc do not stick to the UV resin. When entering eyes, rinse immediately with water and consult doctor for treatment.

The post Supernova Hard UV Resin first appeared on The Little Art Shop.

Pratley Kraftex Pratliglo Resin

artstuff — Tue, 08 Dec 2020 13:35:03 +0000

A High-Gloss Polymer Coating for tables, clocks, jewelry, novelty plaques etc.

Available in 2x 100ml bottles, total 200ml

The post Pratley Kraftex Pratliglo Resin first appeared on The Little Art Shop.